Rick Murphy Rick Murphy's Profile Page

Rick Murphy Rick Murphy

0 Course Enrolled • 0 Course Completed

Biography

NS0-093시험문제시험은저희덤프로패스가능

PassTIP의 Network Appliance인증NS0-093시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의Network Appliance인증NS0-093시험덤프자료를 제공받을수 있습니다.

Network Appliance NS0-093 인증 시험은 NetApp Storage Systems에서 작업하는 하드웨어 지원 엔지니어의 기술과 지식을 테스트하도록 설계되었습니다. 이 시험에는 NetApp Storage Systems의 하드웨어 구성 요소의 설치, 구성, 유지 보수 및 문제 해결과 관련된 광범위한 주제가 포함됩니다. 이 시험은 하드웨어 지원 경험이 있고 스토리지 기술 분야에서 경력을 발전시키려는 전문가를위한 것입니다.

인증 시험을 준비하기 위해 응시자는 NetApp에서 제공하는 다양한 리소스를 활용할 수 있습니다. 이러한 자료에는 교육 과정, 학습 가이드 및 실습 시험이 포함됩니다. 응시자는 NetApp 하드웨어 및 소프트웨어에 대한 실습 경험을 얻기 위해 교육 과정에 참석하는 것이 좋습니다. 연구 안내서는 시험 주제에 대한 자세한 정보를 제공하는 반면, 연습 시험은 응시자가 인증 시험에 대한 준비 상태를 평가하는 데 도움이됩니다.

>> NS0-093시험문제 <<

최신버전 NS0-093시험문제 덤프는 NetApp Accredited Hardware Support Engineer 시험합격의 유일한 자료

PassTIP는 IT인증자격증을 취득하려는 IT업계 인사들의 검증으로 크나큰 인지도를 가지게 되었습니다. 믿고 애용해주신 분들께 감사의 인사를 드립니다. Network Appliance NS0-093덤프도 다른 과목 덤프자료처럼 적중율 좋고 통과율이 장난이 아닙니다. 덤프를 구매하시면 퍼펙트한 구매후 서비스까지 제공해드려 고객님이 보유한 덤프가 항상 시장에서 가장 최신버전임을 약속해드립니다. Network Appliance NS0-093덤프만 구매하신다면 자격증 취득이 쉬워져 고객님의 밝은 미래를 예약한것과 같습니다.

NS0-093 인증 시험을 통과하는 것은 중요한 성과이며 전문가에게 많은 경력 기회를 열 수 있습니다. 인증 시험은 NetApp 하드웨어 제품 지원에 대한 후보자의 기술과 지식을 검증하며, 이는 고용주가 높이 평가합니다. 인증 시험을 통과하는 전문가는 경력을 발전시킬 수 있으며 IT 업계에서보다 어려운 역할을 수행 할 수 있습니다.

최신 NetApp Certified NS0-093 무료샘플문제 (Q55-Q60):

질문 # 55
On a NetApp FAS9000 system, which two field replaceable units (FRUs) are supported for replacement without takeover? (Choose two.)

A. caching module
B. I/O module
C. NVRAM module
D. DCPM module

정답：B,C

설명：
FRUs on FAS9000 Supporting Replacement Without Takeover:
* A (I/O Module): I/O modules can be replaced hot (without takeover) to maintain system uptime during hardware servicing.
* D (NVRAM Module): NVRAM modules on FAS9000 can also be replaced without a node takeover, ensuring data integrity during replacement.
Why Other Options Are Incorrect:
* B (DCPM Module): The DCPM (Data Center Power Management) module is not hot-swappable and requires a node takeover.
* C (Caching Module): The caching module is integrated and typically requires a node takeover or power-down for replacement.
NetApp Reference Documentation:
* Refer to the "NetApp FAS9000 Hardware Service Guide" for supported FRU replacement procedures and operational constraints.

질문 # 56
On an AFF A700 system, a SAS stack is connected to SAS ports 2a and 2b. The system has an additional 4- port SAS card in slot 9.
How should the cabling the corrected for best practices?

A. Use port 2a and 2c.
B. Use port 2b and 9d.
C. Use port 2a and 9a.
D. Use port 2a and 9b.

정답：C

설명：
Best Practices for SAS Cabling in AFF A700 Systems:
* The AFF A700 system has built-in SAS ports (e.g., 2a and 2b) as well as additional SAS ports on optional SAS cards.
* To ensure high availability and redundancy, it is recommended to distribute SAS connections across multiple SAS ports from different controllers or slots.
Why Port 2a and 9a Are Recommended:
* Port 2a is a built-in SAS port on the AFF A700 system.
* Port 9a belongs to the additional SAS card in slot 9.
* By connecting the stack using 2a and 9a, you utilize different SAS domains (built-in controller ports and add-on card ports), providing both path redundancy and load balancing.
NetApp Reference Documentation:
* "NetApp Hardware Universe" and "ONTAP Hardware Installation Guide" highlight that SAS cabling for redundancy should leverage different ports, including those from separate SAS controllers or add-on cards.
* NetApp's best practice guidelines suggest avoiding connections to the same SAS controller or port group for critical stacks.

질문 # 57
Which two tools can be used to recover an inconsistent aggregate? (Choose two.)

A. wafliron
B. wafl_check
C. wafl snapiron
D. file check

정답：A,B

설명：
To recover an inconsistent aggregate, the following tools can be used:
* What it does:This tool is used to perform a consistency check on WAFL metadata. It identifies and attempts to fix WAFL inconsistencies in aggregates.
* When to use:Run wafl_check after identifying WAFL inconsistencies to repair minor metadata issues.
1. wafl_check
* What it does:This tool repairs WAFL inconsistencies by reconstructing metadata. It is more powerful than wafl_check and should only be run under NetApp Support guidance, as improper use can result in data loss.
* When to use:Use wafliron for severe WAFL inconsistencies that cannot be resolved by wafl_check.
2. wafliron
* A. file check:
* This is not a valid NetApp tool.
* C. wafl snapiron:
* While similar in name, snapiron is used for snapshot recovery, not aggregate recovery.
Why Other Options Are Incorrect:
* "ONTAP Aggregate Troubleshooting Guide" details the usage of wafl_check and wafliron.
* NetApp Support documentation provides guidelines for recovering inconsistent aggregates.
References:

질문 # 58
You have created a case with NetApp Support for an issue with a DS4246 shelf on an ONTAP 9.12.1 system.
They have requested that you provide shelf logs.
What action do you need to take to collect the shelf logs?

A. Provide the output of the nodeshell command rdfile/etc/log/shelflog.
B. Invoke a diagnostic autosupport with the subsystem log_files.
C. Invoke a diagnostic AutoSupport with the subsystem storage.
D. Invoke an autosupport of type all using Active IQ Unified Manager.

정답：C

설명：
To collect shelf logs for a DS4246 shelf in an ONTAP 9.12.1 system, you must invoke a diagnostic AutoSupport specifically targeting the storage subsystem. This action ensures that detailed storage logs, including shelf logs, are included in the AutoSupport bundle.
* Use the following command:
Steps to Collect Shelf Logs:bash
Copy code
system node autosupport invoke -node <node_name> -type diagnostic -subsystem storage Replace <node_name> with the name of the node experiencing the issue.
* This command generates an AutoSupport message that includes logs related to storage subsystems, such as disk shelves and adapters.
* Provide the AutoSupport case number to NetApp Support for further analysis.
* A. Provide the output of the nodeshell command rdfile /etc/log/shelflog:
* While this command allows manual reading of shelf logs, it is not a recommended or comprehensive approach for collecting logs for NetApp Support cases.
* B. Invoke an AutoSupport of type all using Active IQ Unified Manager:
* This action generates a generic AutoSupport bundle, which may not include detailed shelf logs unless explicitly targeted.
* D. Invoke a diagnostic AutoSupport with the subsystem log_files:
* The log_files subsystem targets general system logs, not storage-specific logs like shelf logs.
Why Other Options Are Incorrect:
* "ONTAP 9 AutoSupport and Diagnostics Guide" outlines the use of the subsystem storage option for collecting shelf logs.
* The "Troubleshooting Storage Subsystems" documentation specifies diagnostic AutoSupport as the method for gathering shelf-related logs.
References:

질문 # 59
Which two steps are required to replace a drawer in a DS460c shelf? (Choose two.)

A. Shut down both nodes.
B. Evacuate all drives in the drawer.
C. Power off the shelf.
D. Disconnect the cable chains from the chassis.

정답：B,D

질문 # 60
......

NS0-093최신 인증시험 기출자료: https://www.passtip.net/NS0-093-pass-exam.html

Rick Murphy Rick Murphy

Biography

ONLINE COURSE

IELTS Preparation Course

3in1 (Spoken + Writing + Phonetics)

CONTACT

info@tanimahammed.com

USEFUL LINKS

IELTS Preparation Course

Buy Books Online

Language

SOCIAL

Copyright ©2024.Tanimahammed.com. All Rights Reserved